Stainless Steel Nipple Male to Male
$4.85 – $71.21 PER SINGLE PIECE
- Description
- Additional information
Description
Stainless Steel Nipple Male to Male
Use the male to male stainless steel nipple to connect equal threaded female connections. It is advised not to use iron for nipples or bushings to reduce air containments. Use in combination with the stainless steel reduction bushings to reduce line or to connect to a compressor, filter or a dryer in line.
| Code | inch | Thread | qty / bag |
| DIRNPMM048048NPT | 1/2″x1/2″ | Male | 1 |
| DIRNPMM068068NPT | 3/4″x3/4″ | Male | 1 |
| DIRNPMM088088NPT | 1″x1″ | Male | 1 |
| DIRNPMM108108NPT | 1 1/4″x1 1/4″ | Male | 1 |
| DIRNPMM128128NPT | 1 1/2″x1 1/2″ | Male | 1 |
| DIRNPMM168168NPT | 2″x2″ | Male | 1 |
| DIRNPMM208208NPT | 2 1/2″x2 1/2″ | Male | 1 |
| DIRNPMM248248NPT | 3″x3″ | Male | 1 |
Using the stainless steel nipple is an easy way to change over from a previously installed system. On the current system add a female NPT fitting and use an Aircom female NPT valve with the nipple as the connection point. This creates an “apples to apples” connection point between an already installed copper, iron or even another aluminum system.
Additional information
| NPT Thread | 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2", 3" |
|---|---|
| Aircom Series | HR-Polymer Composite, Quick Line Aluminum |
