Polymer Quick Branch Drop
$27.07 – $37.04 PER SINGLE PIECE
Use the Polymer Quick Branch Drop in place of reduction tee’s. The branches require only a drilled hole in the installed pipe. This allows the drops to be installed after the rest of the system without the need for cutting the aluminum pipe. Wrap the drop bracket around the pipe and install the smaller diameter pipe just like any other fitting.
- Description
- Additional information
Description
Polymer Quick Branch Drop
Use the quick drop branches in place of reduction tee’s. The branches require only a drilled hole in the installed pipe. This allows the drops to be installed after the rest of the system without the need for cutting the aluminum pipe. Wrap the drop bracket around the pipe and install the smaller diameter pipe just like any other fitting.
Code | Ø | inch | qty / bag |
QLDERPA025016 | 25X16 | 1″X1/2″ | 2 |
QLDERPA032016 | 32X16 | 1.1/4″X1/2″ | 2 |
QLDERPA040016 | 40X16 | 1.1/2″X1/2″ | 2 |
QLDERPA050016 | 50X16 | 2″X1/2″ | 2 |
Quick Line HR-Polymer Composite Aircom Polymer Elbow 90 Degree – A complete system of pipes in aluminum and fittings in HR-Polymer Composite. The fittings are made in HR-Polymer Composite and are available in diameters:
16–20–25–32–40–50–63 mm
The entire range of threaded fittings is available with GAS or NPT thread. The polymer composite series is a low cost
Aircom Polymer Fitting Construction
AIRCOM is the only company that offers a complete range of piping systems differentiated by features and performance.
Our constant drive to innovate has led to two new piping systems: Quick Line with aluminum pipes and with fittings in aluminum and in HR-Polymer Composite. Both systems stand out in terms of speed and ease of assembly and for their modular characteristics.
Additional information
Weight | N/A |
---|---|
Diameter | |
Outlet | 1/2" |
Aircom Series | HR-Polymer Composite |