Reduction Spigot Male-Male Connection – Aluminum
$21.78 – $1,149.50 PER SINGLE PIECE
Use the reduction spigot to reduce pipe inline, use an equal union on each pipe end and place spigot in the middle of the two unions.
- Description
- Additional information
Description
Reduction Spigot Male-Male Connection – Aluminum
Use reduction spigot male-male connection to reduce pipe inline.
| Code | Ø | inch | qty / bag |
| QLRIDTU025020 | 25×20 | 1″x3/4″ | 1 |
| QLRIDTU032020 | 32×20 | 1 1/4″x3/4″ | 1 |
| QLRIDTU032025 | 32×25 | 1 1/4″x1″ | 1 |
| QLRIDTU040025 | 40×25 | 1 1/2″x1″ | 1 |
| QLRIDTU040032 | 40×32 | 1 1/2″x1 1/4″ | 1 |
| QLRIDTU050032 | 50×32 | 2″x1 1/4″ | 1 |
| QLRIDTU050040 | 50×40 | 2″x1 1/2″ | 1 |
| QLRIDTU063040 | 63×40 | 2 1/2″x1 1/2″ | 1 |
| QLRIDTU063050 | 63×50 | 2 1/2″x2″ | 1 |
| QLRIDTU080050 | 80×50 | 3″x2″ | 1 |
| QLRIDTU080063 | 80×63 | 3″x2 1/2″ | 1 |
| QLRIDTU110050 | 110×50 | 4″x2″ | 1 |
| QLRIDTU110063 | 110×63 | 4″x2 1/2″ | 1 |
| QLRIDTU110080 | 110×80 | 4″x3″ | 1 |
| QLRIDTU168063 | 168X63 | 6″X2 1/2″ | 1 |
| QLRIDTU168080 | 168X80 | 6″X3″ | 1 |
| QLRIDTU168110 | 168X110 | 6″X4″ | 1 |
| QLRIDTU220080 | 220X80 | 8″X3″ | 1 |
| QLRIDTU220110 | 220X110 | 8″X4″ | 1 |
| QLRIDTU220168 | 220X168 | 8″X6″ | 1 |
Quick Line Aluminum
A complete system of pipes and fittings in aluminum.
The fittings are made in painted, die-cast aluminum and are available in diameters:
20–25–32–40–50–63–80–110–168 & 220 mm
The entire range of threaded fittings is available with GAS or NPT thread.
Aircom systems pay for themselves.
5 main reasons:
- Eliminate Wasted Air and Leaks – Our components in aluminum, technopolymer and HIP guarantee superior, above-average performance.
- Modular Design – Flexibility of use and greater adaptability to the specific usage requirements.
- Expandability According to Requirements – The system grows with the plant.
- Easy, Rapid Installation – Reduction in labor costs and ease of intervention.
- Optimum, Constant Performance – Constant energy savings over time.
Use the reduction spigot to reduce pipe inline, use an equal union on each pipe end and place spigot in the middle of the two unions.
Additional information
| Weight | N/A |
|---|---|
| Diameter | 3/4" or 20mm, 1" or 25mm, 1 1/4" or 32mm, 1 1/2" or 40mm, 2" or 50mm, 2 1/2" or 63mm, 3" or 80mm, 4" or 110mm, 6" or 168mm, 8" or 220mm |
| Outlet | 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2", 3", 4", 6" |
| Aircom Series | Grooved Series, Quick Line Aluminum |
